Whether a garment is called a delicacy or not, the most telling place is detail. The details of the dress are the design around buttons and buttons. New clothes buy home but always feel that some places do not fine, if you want to dress a bit of exquisite workmanship, we can try this to trim (trim) method!
1. according to the diameter of the button to set the width of the buttonhole, buttonhole width should be 0.3 ~ 0.6 cm diameter plus button, if the button is thick, it should also be the thickness of the account; in addition, required buttonhole cloth should be added back lining or adhesive lining.
2. to two blocks with the lining of the welt cloth, welt height is generally 5 cm, and its width is 3 ~ 5 buttonhole width plus two cm; alignment will face down, in the buttonhole welt position below the line, with a 0.6 cm gap of a horizontal line and a buttonhole width and. The width of the seam here is the width of the border strip after making it. If you want to make it narrower or wider, you can reduce or increase the width of the seam accordingly.
3. in the cloth will cut off the ends of the opposite buttonholes, cut into triangles, then two blocks from the cut hole in the side opposite to the plug.
4. will be on both sides of the buttonhole seam separately ironing.
5. will be two fold to the center position of buttonhole welt tightly, and with the iron will fold ironing.
6. turn back to the front, and turn the small triangle downward and inward.
7. close to the bottom of the small triangle it in two welt stitch.
8. after the completion of the welt trimmed.
没有评论:
发表评论