H buckle FAQ editor

1, to jeans, with a little force can pull, nail and the button is not tight

If it is glue heart h clasp, this glue heart has relationship with the h buckle, if use almost plastic glue heart, will not call the nail under pressure, will be pushed out. So we will drop down to the hard pull. And with good plastic - new material to do, will not appear this kind of circumstance. At the same time also has relations with the shape of the nail, have sharp nails, screw nails, generally USES the screw nails.

2, nails on buttons, in front of the h buckle directly play to wear

Can simple analysis can come out, is h button panel do too thin. Sustain the momentum of the nail dozen come over, suddenly can beat button surface wear off. This is a less, like alloy, copper, iron h buckle, do ordinary is also very rare, unless deliberately hitting bottom go to, the surface wear off.

3, h buckle order on the jeans on, the surface color

Actually this question is simple, the surface of the h buckle rub off, it generally has relationship with electroplating, spray paint, plating is not good, no oil seal products, color generally stay long, in the air after oxidation, the color will become weak, also in the process of friction will drop down. And under the condition of spray paint, lacquer, it has to do with product spray paint composition, does not generally good paint, unless it is the kind of paint is very poor.

4, h buckle is rough

Button appear this kind of problem, it has relations with the plant surface treatment process, polishing does not reach the designated position, product mould open well. This done, can avoid completely.

And h buckle according to different customer requirements, like drops of glue, paint, plating, etc., the problems and according to specific situation